Cork bulletin board with wooden frame and metal hook on a white background
Cork bulletin board with wooden frame on a white background

Step 1 / 4

Unbox

  1. Open the box carefully.
  2. Remove the metal portrait wrapped in foam and set it aside.
  3. Take out the frame and place it on a flat table.

Important: Make sure the frame hangers face upright before you attach the art.

Step 2 / 4

Attach the portrait

  1. Hold the metal portrait over the frame.
  2. Align the corners.
  3. Let the magnets do the work: it snaps into place at all four corners.
Before
After

Step 3 / 4

Remove it if needed

  1. Grip the portrait near one corner, close to a magnet.
  2. Place your thumb on the frame.
  3. Gently pull upward until the magnet releases.

Step 4 / 4

Adjust the position

  1. Hold the portrait with four fingers.
  2. Rest your thumb on the side of the frame.
  3. Gently push the portrait into position.

All set

Other guides: Unframed portrait Metal sign

Need a hand?

Send us a photo of where you are stuck and we will walk you through it.

Contact us